Experimental investigation on self-sustained smouldering of food-processing sludge with extremely high moisture content From laboratory-scale to pilot-scale volumetric scale-up

Experimental investigation on self-sustained smouldering of food-processing sludge with extremely high moisture content : From laboratory-scale to pilot-scale volumetric scale-up

Copyright © 2023. Published by Elsevier Ltd.

Bibliographische Detailangaben
Veröffentlicht in:Waste management (New York, N.Y.). - 1999. - 158(2023) vom: 01. März, Seite 13-22
1. Verfasser: Ma, Lun (VerfasserIn)
Weitere Verfasser: Yan, Chao, Feng, Chao, Qiao, Yu, Huang, Jingchun, Fang, Qingyan, Zhang, Cheng
Format: Online-Aufsatz
Sprache:English
Veröffentlicht: 2023
Zugriff auf das übergeordnete Werk:Waste management (New York, N.Y.)
Schlagworte:Journal Article Continuous operation Food-processing sludge with extremely high moisture content Pilot-scale device Self-sustaining smouldering Waste disposal Sewage Solid Waste Polychlorinated Dibenzodioxins
Beschreibung
Zusammenfassung:Copyright © 2023. Published by Elsevier Ltd.
Although smouldering of solid waste with high moisture has shown strong promise in laboratory studies, there are fewer reports about the larger-scale device and continuous operation. This work studies a self-sustaining smouldering treatment of food-processing sludge (FPS) with extremely high moisture (over 85 %) in laboratory- and pilot-scale devices. Results from laboratory-scale experiments show that adding auxiliary fuel is necessary to maintain FPS self-sustaining smouldering, Sand: FPS: Sawdust = 25:5:1 is a reasonable mixing ratio. Then, the self-sustaining smouldering is volumetrically scaled up to the pilot-scale. The smouldering asynchrony in the feedstock is observed due to the non-uniform air flux. Compared to the laboratory-scale, the pilot-scale device presents a similar temperature level but a higher smouldering velocity. Furthermore, a continuous process in the pilot-scale device is successfully performed, and the flue gas concentrations are measured: 15.0 ∼ 16.5 % for O2, 4000 ∼ 5500 ppm for CO, 155 ∼ 195 ppm for NOx, 210 ∼ 250 ppm for VOCs, 55 ∼ 70 ppm for SO2, 0.0138 ∼ 0.0317 ngTEQ/m3 (at 11 % O2) for dioxin. These studied results can provide useful information for continuous, low-energy solid waste treatment
Beschreibung:Date Completed 10.02.2023
Date Revised 10.02.2023
published: Print-Electronic
Citation Status MEDLINE
ISSN:1879-2456
DOI:10.1016/j.wasman.2023.01.005