Evaluating the suitability of tungsten, titanium and stainless steel wires as current collectors in microbial fuel cells
An appropriate current collector (CC) is crucial for harvesting substantial power in a microbial fuel cell (MFC). In the present study, stainless steel (SS) and titanium wires were used as the CCs for both the anode and cathode of MFC-1 and MFC-2, respectively. Tungsten wire (TW) was used as the ano...
| Veröffentlicht in: | Water science and technology : a journal of the International Association on Water Pollution Research. - 1986. - 77(2018), 3-4 vom: 01. Feb., Seite 999-1006 |
|---|---|
| 1. Verfasser: | |
| Weitere Verfasser: | |
| Format: | Online-Aufsatz |
| Sprache: | English |
| Veröffentlicht: |
2018
|
| Zugriff auf das übergeordnete Werk: | Water science and technology : a journal of the International Association on Water Pollution Research |
| Schlagworte: | Journal Article Stainless Steel 12597-68-1 Titanium D1JT611TNE Tungsten V9306CXO6G |
| Zusammenfassung: | An appropriate current collector (CC) is crucial for harvesting substantial power in a microbial fuel cell (MFC). In the present study, stainless steel (SS) and titanium wires were used as the CCs for both the anode and cathode of MFC-1 and MFC-2, respectively. Tungsten wire (TW) was used as the anode CC in MFC-3, with SS wire as the cathode CC. In MFC-4, TW was used as the cathode CC with SS wire as the anode CC, and in MFC-5 both electrode CCs were TW. The power density, current density, oxidation current and bio-capacitance were compared to select the best and most cost effective CC material to enhance the power output of MFCs. Maximum power densities (mW/m2) of 32.28, 93.10, 225.38, 210.74, and 234.88 were obtained in MFC-1, MFC-2, MFC-3, MFC-4, and MFC-5, respectively. The highest current density (639.86 mA/m2) and coulombic efficiency (23.12 ± 1.5%) achieved in MFC-5 showed TW to be the best CC for both electrodes. The maximum oxidation current of 7.4 mA and 7 mA and bio-capacitance of 10.3 mF/cm2 and 9.7 mF/cm2 were achieved in MFC-3 and MFC-5, respectively, suggesting TW is the best as the anode CC and SS wire as the cathode CC to reduce MFC fabrication costs |
|---|---|
| Beschreibung: | Date Completed 15.08.2018 Date Revised 02.12.2018 published: Print Citation Status MEDLINE |
| ISSN: | 0273-1223 |
| DOI: | 10.2166/wst.2017.621 |