Removal of Hg(II) from aqueous solution using sodium humate as heavy metal capturing agent

An environmental friendly and economic natural biopolymer-sodium humate (HA-Na) was used to capture Hg(II) from aqueous solutions, and the trapped Hg(II) (HA-Na-Hg) was then removed by aluminium coagulation. The best Hg(II) capturing performance (90.60%) was observed under the following conditions:...

Ausführliche Beschreibung

Bibliographische Detailangaben
Veröffentlicht in:Water science and technology : a journal of the International Association on Water Pollution Research. - 1986. - 74(2016), 12 vom: 28. Dez., Seite 2946-2957
1. Verfasser: Wang, Shixiang (VerfasserIn)
Weitere Verfasser: Liu, Yong, Fan, Qin, Zhou, Anlan, Fan, Lu, Mu, Yulan
Format: Online-Aufsatz
Sprache:English
Veröffentlicht: 2016
Zugriff auf das übergeordnete Werk:Water science and technology : a journal of the International Association on Water Pollution Research
Schlagworte:Evaluation Study Journal Article Alum Compounds Humic Substances Metals, Heavy Solutions Water Pollutants, Chemical aluminum sulfate 34S289N54E Sodium mehr... 9NEZ333N27 Aluminum CPD4NFA903 Mercury FXS1BY2PGL
Beschreibung
Zusammenfassung:An environmental friendly and economic natural biopolymer-sodium humate (HA-Na) was used to capture Hg(II) from aqueous solutions, and the trapped Hg(II) (HA-Na-Hg) was then removed by aluminium coagulation. The best Hg(II) capturing performance (90.60%) was observed under the following conditions: initial pH of 7.0, coagulation pH of 6.0, HA-Na dosage of 5.0 g L-1, Al2(SO4)3.18H2O dosage of 4.0 g L-1, initial Hg(II) concentration of 50 mg L-1 and capturing time of 30 min. The HA-Na compositions with the molecular weight beyond 70 kDa showed the most intense affinity toward Hg(II). The results showed that the reaction equilibrium was achieved within 10 min (pH 7.0), and could be well fitted by the pseudo-second-order kinetics model. The capturing process could be well described by the Langmuir isotherm model and the maximum capturing capacity of Hg(II) was high up to 9.80 mg g-1 at 298 K (pH 7.0). The Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis showed that the redox reaction between Hg(II) and HA-Na and the coordination reaction of carboxyl and hydroxy groups of HA-Na with Hg(II) were responsible for Hg(II) removal. The successive regeneration experiment showed that the capturing efficiency of humates for Hg(II) was maintained at about 51% after five capture-regeneration recycles
Beschreibung:Date Completed 22.06.2017
Date Revised 10.12.2019
published: Print
Citation Status MEDLINE
ISSN:0273-1223
DOI:10.2166/wst.2016.466