|
|
|
|
| LEADER |
01000caa a22002652 4500 |
| 001 |
NLM240753127 |
| 003 |
DE-627 |
| 005 |
20250217083938.0 |
| 007 |
cr uuu---uuuuu |
| 008 |
231224s2014 xx |||||o 00| ||eng c |
| 024 |
7 |
|
|a 10.2166/wst.2014.242
|2 doi
|
| 028 |
5 |
2 |
|a pubmed25n0802.xml
|
| 035 |
|
|
|a (DE-627)NLM240753127
|
| 035 |
|
|
|a (NLM)25098869
|
| 040 |
|
|
|a DE-627
|b ger
|c DE-627
|e rakwb
|
| 041 |
|
|
|a eng
|
| 100 |
1 |
|
|a Yang, C W
|e verfasserin
|4 aut
|
| 245 |
1 |
0 |
|a Pretreatment of furfural industrial wastewater by Fenton, electro-Fenton and Fe(II)-activated peroxydisulfate processes
|b a comparative study
|
| 264 |
|
1 |
|c 2014
|
| 336 |
|
|
|a Text
|b txt
|2 rdacontent
|
| 337 |
|
|
|a ƒaComputermedien
|b c
|2 rdamedia
|
| 338 |
|
|
|a ƒa Online-Ressource
|b cr
|2 rdacarrier
|
| 500 |
|
|
|a Date Completed 16.10.2014
|
| 500 |
|
|
|a Date Revised 07.12.2022
|
| 500 |
|
|
|a published: Print
|
| 500 |
|
|
|a Citation Status MEDLINE
|
| 520 |
|
|
|a The Fenton, electro-Fenton and Fe(II)-activated peroxydisulfate (PDS) processes have been applied for the treatment of actual furfural industrial wastewater in this paper. Through the comparative study of the three processes, a suitable pretreatment technology for actual furfural wastewater treatment was obtained, and the mechanism and dynamics process of this technology is discussed. The experimental results show that Fenton technology has a good and stable effect without adjusting pH of furfural wastewater. At optimal conditions, which were 40 mmol/L H₂O₂ initial concentration and 10 mmol/L Fe²⁺ initial concentration, the chemical oxygen demand (COD) removal rate can reach 81.2% after 90 min reaction at 80 °C temperature. The PDS process also has a good performance. The COD removal rate could attain 80.3% when Na₂S₂O₈ initial concentration was 4.2 mmol/L, Fe²⁺ initial concentration was 0.1 mol/L, the temperature remained at 70 °C, and pH value remained at 2.0. The electro-Fenton process was not competent to deal with the high-temperature furfural industrial wastewater and only 10.2% COD was degraded at 80 °C temperature in the optimal conditions (2.25 mA/cm² current density, 4 mg/L Na₂SO₄, 0.3 m³/h aeration rate). For the Fenton, electro-Fenton and PDS processes in pretreatment of furfural wastewater, their kinetic processes follow the pseudo first order kinetics law. The pretreatment pathways of furfural wastewater degradation are also investigated in this study. The results show that furfural and furan formic acid in furfural wastewater were preferentially degraded by Fenton technology. Furfural can be degraded into low-toxicity or nontoxic compounds by Fenton pretreatment technology, which could make furfural wastewater harmless and even reusable
|
| 650 |
|
4 |
|a Journal Article
|
| 650 |
|
4 |
|a Research Support, Non-U.S. Gov't
|
| 650 |
|
7 |
|a Ferrous Compounds
|2 NLM
|
| 650 |
|
7 |
|a Industrial Waste
|2 NLM
|
| 650 |
|
7 |
|a Sulfates
|2 NLM
|
| 650 |
|
7 |
|a Waste Water
|2 NLM
|
| 650 |
|
7 |
|a Furaldehyde
|2 NLM
|
| 650 |
|
7 |
|a DJ1HGI319P
|2 NLM
|
| 700 |
1 |
|
|a Wang, D
|e verfasserin
|4 aut
|
| 700 |
1 |
|
|a Tang, Q
|e verfasserin
|4 aut
|
| 773 |
0 |
8 |
|i Enthalten in
|t Water science and technology : a journal of the International Association on Water Pollution Research
|d 1986
|g 70(2014), 3 vom: 28., Seite 414-21
|w (DE-627)NLM098149431
|x 0273-1223
|7 nnns
|
| 773 |
1 |
8 |
|g volume:70
|g year:2014
|g number:3
|g day:28
|g pages:414-21
|
| 856 |
4 |
0 |
|u http://dx.doi.org/10.2166/wst.2014.242
|3 Volltext
|
| 912 |
|
|
|a GBV_USEFLAG_A
|
| 912 |
|
|
|a SYSFLAG_A
|
| 912 |
|
|
|a GBV_NLM
|
| 912 |
|
|
|a GBV_ILN_350
|
| 951 |
|
|
|a AR
|
| 952 |
|
|
|d 70
|j 2014
|e 3
|b 28
|h 414-21
|