Glow discharge plasma-assisted template removal of SBA-15 at ambient temperature for high surface area, high silanol density, and enhanced CO₂ adsorption capacity
Glow discharge plasma was successfully applied for effective removal of the organic template P-123 from SBA-15 ordered mesoporous silica at near-room-temperature (below 50 °C) and in a short operation time (2 h). The as-made SBA-15 treated with glow discharge exhibited a larger surface area of 1025...
Veröffentlicht in: | Langmuir : the ACS journal of surfaces and colloids. - 1992. - 30(2014), 27 vom: 15. Juli, Seite 8124-30 |
---|---|
1. Verfasser: | |
Weitere Verfasser: | , |
Format: | Online-Aufsatz |
Sprache: | English |
Veröffentlicht: |
2014
|
Zugriff auf das übergeordnete Werk: | Langmuir : the ACS journal of surfaces and colloids |
Schlagworte: | Journal Article |
Zusammenfassung: | Glow discharge plasma was successfully applied for effective removal of the organic template P-123 from SBA-15 ordered mesoporous silica at near-room-temperature (below 50 °C) and in a short operation time (2 h). The as-made SBA-15 treated with glow discharge exhibited a larger surface area of 1025 m(2) g(-1) with larger pores and microspore volume as compared with that of conventional calcination (550 °C and 5 h, 827 m(2) g(-1)). In addition to less structural shrinkage, the plasma-prepared SBA-15 showed significantly increased silanol density from 5.4 to 6.6-7.6 mmol g(-1), which led directly to higher amine loading from 1.8 to 3.0 mmol g(-1). Consequently, the plasma-treated sample showed 77% more CO2 capacity and 60% higher CO2/N2 selectivity than the conventionally treated sample at 0.15 bar and 25 °C. The advantage of using glow discharge plasma for low-temperature template removal for achieving enhanced performance for CO2 adsorption is clearly demonstrated |
---|---|
Beschreibung: | Date Completed 22.04.2015 Date Revised 15.07.2014 published: Print-Electronic Citation Status PubMed-not-MEDLINE |
ISSN: | 1520-5827 |
DOI: | 10.1021/la501794z |