|
|
|
|
| LEADER |
01000naa a22002652 4500 |
| 001 |
NLM202020401 |
| 003 |
DE-627 |
| 005 |
20231223223531.0 |
| 007 |
cr uuu---uuuuu |
| 008 |
231223s2010 xx |||||o 00| ||eng c |
| 024 |
7 |
|
|a 10.1109/TUFFC.2010.1679
|2 doi
|
| 028 |
5 |
2 |
|a pubmed24n0673.xml
|
| 035 |
|
|
|a (DE-627)NLM202020401
|
| 035 |
|
|
|a (NLM)20889406
|
| 040 |
|
|
|a DE-627
|b ger
|c DE-627
|e rakwb
|
| 041 |
|
|
|a eng
|
| 100 |
1 |
|
|a Kosec, Marija
|e verfasserin
|4 aut
|
| 245 |
1 |
0 |
|a High-performance PMN-PT thick films
|
| 264 |
|
1 |
|c 2010
|
| 336 |
|
|
|a Text
|b txt
|2 rdacontent
|
| 337 |
|
|
|a ƒaComputermedien
|b c
|2 rdamedia
|
| 338 |
|
|
|a ƒa Online-Ressource
|b cr
|2 rdacarrier
|
| 500 |
|
|
|a Date Completed 10.01.2011
|
| 500 |
|
|
|a Date Revised 04.10.2010
|
| 500 |
|
|
|a published: Print
|
| 500 |
|
|
|a Citation Status PubMed-not-MEDLINE
|
| 520 |
|
|
|a This article describes some of our work on ₀.₆₅Pb(Mg₁/₃Nb(₂/₃)O₃-₀.₃₅PbTiO₃ (0.65PMN-0.35PT) thick films printed on alumina substrates. These thick films, with the nominal composition ₀.₆₅Pb(Mg₁/₃Nb(₂/₃)O₃-₀.₃₅PbTiO₃, were produced by screen-printing and firing a paste prepared from an organic vehicle and pre-reacted fine particles of avery chemically homogeneous powder. To improve the adhesion of the 0.65PMN-0.35PT to the platinized alumina substrate,a Pb(Zr₀.₅₃Ti₀.₄₇)O₃ layer was deposited between the electrode and the substrate. The samples were then sintered at 950 °C for 2 h with various amounts of packing powder on the alumina (Al₂O₃) substrates. The sintering procedure was optimized to obtain dense 0.65PMN-0.35PT films. The films were then characterized using scanning electron microscopy as well as measurements of the dielectric and piezoelectric constants.The electrostrictive behavior of the 0.65PMN-0.35PT thick films was investigated using an atomic force microscope(AFM). Finally, substrate-free, large-displacement bending type actuators were prepared and characterized, and the normalized displacement (i.e., the displacement per unit length) of the actuators was determined to be 55 μm/cm at 3.6 kV/cm
|
| 650 |
|
4 |
|a Journal Article
|
| 650 |
|
4 |
|a Research Support, Non-U.S. Gov't
|
| 700 |
1 |
|
|a Ursic, Hana
|e verfasserin
|4 aut
|
| 700 |
1 |
|
|a Holc, Janez
|e verfasserin
|4 aut
|
| 700 |
1 |
|
|a Hrovat, Marko
|e verfasserin
|4 aut
|
| 700 |
1 |
|
|a Kuscer, Danjela
|e verfasserin
|4 aut
|
| 700 |
1 |
|
|a Malic, Barbara
|e verfasserin
|4 aut
|
| 773 |
0 |
8 |
|i Enthalten in
|t IEEE transactions on ultrasonics, ferroelectrics, and frequency control
|d 1986
|g 57(2010), 10 vom: 01. Okt., Seite 2205-12
|w (DE-627)NLM098181017
|x 1525-8955
|7 nnns
|
| 773 |
1 |
8 |
|g volume:57
|g year:2010
|g number:10
|g day:01
|g month:10
|g pages:2205-12
|
| 856 |
4 |
0 |
|u http://dx.doi.org/10.1109/TUFFC.2010.1679
|3 Volltext
|
| 912 |
|
|
|a GBV_USEFLAG_A
|
| 912 |
|
|
|a SYSFLAG_A
|
| 912 |
|
|
|a GBV_NLM
|
| 912 |
|
|
|a GBV_ILN_22
|
| 912 |
|
|
|a GBV_ILN_24
|
| 912 |
|
|
|a GBV_ILN_350
|
| 951 |
|
|
|a AR
|
| 952 |
|
|
|d 57
|j 2010
|e 10
|b 01
|c 10
|h 2205-12
|