Suppression of reflection coefficients of surface acoustic wave filters using quadrature hybrids

This paper proposes a simple technique to suppress the reflection coefficients S11 and S22 of surface acoustic wave (SAW) filters. Two identical SAW filters are sandwiched in between two quadrature hybrids, where their two ports are used as input and output, and others are terminated by matched load...

Ausführliche Beschreibung

Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on ultrasonics, ferroelectrics, and frequency control. - 1999. - 53(2006), 10 vom: 25. Okt., Seite 1912-7
1. Verfasser: Wen, Jiguo (VerfasserIn)
Weitere Verfasser: Hashimoto, Ken-Ya, Omori, Tatsuya, Yamaguchi, Masatsune, Kawachi, Osamu, Ueda, Masanori
Format: Aufsatz
Sprache:English
Veröffentlicht: 2006
Zugriff auf das übergeordnete Werk:IEEE transactions on ultrasonics, ferroelectrics, and frequency control
Schlagworte:Journal Article
Beschreibung
Zusammenfassung:This paper proposes a simple technique to suppress the reflection coefficients S11 and S22 of surface acoustic wave (SAW) filters. Two identical SAW filters are sandwiched in between two quadrature hybrids, where their two ports are used as input and output, and others are terminated by matched loads. First, it is shown by simulation that both [S11] and [S22] are suppressed to be less than -20 dB without deteriorating the transmission characteristics. Next, two hybrids using microstrip lines were fabricated, and two RF SAW filters for GSM850 were sandwiched in between them. The result showed that the maximum [S11] within the passband was improved from -12.5 dB to -21.7 dB, i.e., 9.2 dB suppression of [S11] was achieved by sacrificing only the insertion loss of less than 0.6 dB. We also attempted to replace the microstrip lines with lumped elements. In this case, the maximum [S11] within the passband was improved more than 7.5 dB with the increased insertion loss of less than 1.5 dB. Finally, simple discussion is given on the inclusion of the transformer function in the quadrature hybrid
Beschreibung:Date Completed 20.11.2006
Date Revised 17.09.2019
published: Print
Citation Status PubMed-not-MEDLINE
ISSN:0885-3010